20-3000MHz Waterproof VIP Convoy Bomb Jammer, Vehicle-Mounted IED
Jammer
Use Manual - > 20-3000MHz Waterproof VIP Bomb Jammer.pdf
Preface
- Thanks for choosing our Waterproof VIP Protection(RCIED) Bomb
Jammer System.
- In order to ensure that you can be familiar with the operation of
this machine as soon as possible, this user manual could provide
you the details, which includes product introduction, using method,
system setting, attention points and variable notices.
- This jammer has passed the strict inspection and gotten the
certification from The Ministry of Public Security Safety and
Police Electronic Product Quality Inspection Center, Electronic
Products Quality Control Center, and The Electromagnetic Leakage
Transmission Safety Protection Product Testing Center.
- We are very careful while making this manual to ensure the
information provided be correct and reliable, but if there is any
mistakes, we hope for your forgiveness and instruction. Thanks.
Note:This Jammer is used for the place where the wireless signal is
not allowed.
System Overview
Now, let us introduce this jammer system to you, let you understand
the position of all buttons, Component and any other hardware
features.
Tag: Main System and Power Supply
Tag: Main System(Front Cover open)
Tag: Power Supply (Front Cover open)
Tag: Power Supply Front View
Tag: Host Front View
Product Features
1. Technical Specification
| Channel | Frequency Range | Output Power(±1dBm) |
| CH1 | 500-1000 MHz | 50 dBm |
| CH2 | 1000-1500 MHz | 50 dBm |
| CH3 | 1500-2000 MHz | 50 dBm |
| CH4 | 2000-2500 MHz | 50 dBm |
| CH5 | 2500-3000 MHz | 50 dBm |
| CH6 | 20-80 MHz | 50 dBm |
| CH7 | 80-200 MHz | 51.3 dBm |
| CH8 | 200-500 MHz | 51.3 dBm |
| CH9 | 851-894 MHz | 51.3 dBm |
| CH10 | 925-960 MHz | 51.3 dBm |
| CH11 | 1805-1990 MHz | 51.3 dBm |
| CH12 | 2110-2170 MHz | 51.3 dBm |
| CH13 | 2400-2500 MHz | 50 dBm |
Power Supply:AC220V Jamming radius: 50-500M depending on the environment signal
strength |
Power Consumption: 3900W Host Weight :79.5Kg Host Size(L×H×W): 660×480×520 mm Power Supply Weight:49.3Kg Power Supply Size:466×385×420 mm |
| Humidity: 30%-95% Working temp: -10 to +55 degree Celsius |
2. Technical Feature
Using DDS Jamming technology to make the Frequency setting more
precise
Highly Efficiency output power, long jamming radius
Slow start up design of circuit to make the device work stably.
Perfect Self Protection:
Over Heat protection – Thermal protector
Over current protection
High input Voltage and low Voltage protection
VSWR protection: against antenna miss-match including open and
short circuit
Waterproof, suitable for using at outdoor.
3. Connecting Port
13pcs RF Output Ports for Connecting Antennas;
2pcs (AC-220V&DC-28V) Input Port;
1 RCU Port for Wire Control Panel.
Chapter 3 System accessories
The jammer full set is made up of host, antennas and remote
controller.
Host contains 13 modules. Each module can adjust power, warning
standing wave indicator and warning temperature indicator
separately .
1. Remote Controller
All the operations are integrated in the remote controller, the
user can operate it far from equipment, very convenient.
2. Antenna
Type1:Omni-directional antenna
Gain: 3dBi
| impedance | 50Ω |
| VSWR | ≤1.8 |
| Gain | 3dBi |
| Power | 150W |
| polarization | Vertical |
| intermodulation | <-107dBm |
| Connector | 7/16 or N-K |
| lightning protection | Ground |
| wind barrier | 60(m/s) |
| Diameter | φ40(mm) |
Type2:Directional Board antenna
Interface: N Female
Gain: 13-15dBi
Start to use
Step1 Open the boxes
Open the boxes, retain the boxes that have been unglued for moving
or transporting in the future.
Check the opened equipment and accessories to make sure whether
they are intact or not. Please contact with your supplier soon if
you find our products have any missing parts or damage.
Step2 Connect the electric cable and antennas
1. Coaxial-cable is mainly used in connecting the antenna and
jammers, and the antenna must be fixed before connect it.
Notice: The jammer must be started after its antenna has been
connected with it, or the jammer will be damaged badly. All costs
and consequences which caused by user's this action will bear
liability on his own.
2. Please use cables to make the Antenna and Host Port one-to-one
connection well.
3. Connect the host and remote control box.
Notice: When you begin to connect the main engine and remote
control box, the Red Dot on connecting line's plug must be match
with the Red Dot on port's plug, or they cannot be inserted (As
shown in the following picture);
4. Please put the 3pin AC INPUT power line which in the power box
join up into electric supply through air switch.
Notice: The nominal parameter of air switch must be greater than
10KW/45A, any index of air switch that under this nominal parameter
may cause power supply or equipment damage badly, and all costs and
consequences which caused by user's this action will bear liability
on his own.
Step3 Turn on the jammer
1. Put the air switch to ON position.
2. Open the front cover of power box, and put the ship type switch
to "I" position
3. Acquiesce 25% output power while jammer is working, and you can
regulate the power size by yourself, and the adjustment method will
be illustrated next step.
Step4 Operate Jammer
Our jammers have no any interface about operation or control, all
operating is realized through the remote control boxes.
1)The Application Method of Function Key Shortcut.
Tag: The Picture of Function Key Shortcuts
Step5 Turn off the Jammer
Turn off the red switcher on “off” position
- Switch off the power supply.
- Move away 220V power at the back of main machine
- Move away panel antenna.
- The jammer is out of work.
Notices
- Be sure to connect all the antenna before the power supply is
switch on. Please do not take off antenna when the machine is
working.
- Antenna shall be used vertical to the ground, working more
efficiently.
- Please don’t put the jammer in the water and fire to avoid using in
the bad
condition of over-wet, over-hot, high voltage and high magnetism.
- If the jammer can not be charged or other unconventionality( the
indicator light doesn’t light up), please contact with the
distributor in local place. Any refit and incorrect repair is not
allowed.
- Any ruin and disrepair caused by incorrect operation and
disassembly will be excluded from the repair with free of charge.
